Office: (928) 453-8181
Toll Free: (800) 342-6396
Fax: (928) 453-5606
 


 HOME | ABOUT US | FAQ | DEALERS/MANUFACTURES | PRODUCTS | BARE CHAIN SETUPS | ARTICLES | CONTACT US | EMAIL
BARE CHAIN SETUPS


We have provided you with choices of chain setups, please feel free to use any number of them.

We would want to suggest you check with the trencher dealer in your local area as they might have a suggested set up for your particular ground condition.

THIS WEBSITE IS NOT TO BE INTENDED TO SELL TO THE END USER.  ALL PRODUCTS ARE SUPPLIED THROUGH YOUR LOCAL TRENCHER DEALER.  PLEASE SEE OUR DEALER/MANUFACTURERS PAGE FOR YOUR NEAREST DEALER.



33K BARE CHAIN SETUPS

1.654 Half Shark® and Half Cup Tooth 26 Stations

50K BARE CHAIN SETUPS

2.00 Half Shark® and Half Cup Tooth 39 Stations
2.00 Half Shark® and Half Cup Tooth 42 Stations
2.00 Full Shark Side Mounts® 42 Stations
2.00 Full Shark Side Mounts® 36 Stations
2.00 Half Shark® and Half Cup Tooth 12 inch cut
75K BARE CHAIN SETUPS

2.644 Half Shark® and Half Cup Tooth 39 Stations
2.644 Full Shark Side Mounts ®42 Stations
110K BARE CHAIN SETUPS

3.067 Full Shark® 35 Stations
3.067 Half Shark® and Half Cup Tooth 35 Stations



THE ULTIMATE DIGGING SYSTEM
Chain Sizes


33,000 LB Test
Shark Chain®
Used on all walk-behind trenchers.
50,000 LB Test
Shark Chain®		 Popular size used on mid-size rubber tire ride on trenchers.
75,000 LB Test
Shark Chain®		 Another popular size used on mid-size rubber tire ride on trenchers.
110,000 LB Test
Shark Chain®

 Used on larger horsepower rubber tire trenchers.

- BACK TO TOP -


 
Shark Chain® is protected under
Patent# 5,248,188
Shark Tooth® is a Trademark of Consolidated Carbide, Ltd
Shark ® is a Trademark of Consolidated Carbide, Ltd.
Site design by Frontline Graphics
Shark Chain® is a Federally Registered Trademark
of Consolidated Carbide, Ltd.